![](https://www.becker-hickl.com/wp-content/uploads/2023/06/DCS-metabol-Toptica-w-backgroundimage-comp80-6-9-1024x615.jpg)
Comfortable, Label-Free and Near-Instantaneous Two-Photon Metabolic Imaging with B&H’s Legendary Lifetime Precision.
This turnkey FLIM microscope is configured to give you the best results out of the box. Equipped with TOPTICA’s newest turn-key femtosecond pulsed lasers for NADH and FAD excitation it provides the results you need both at university and in the clinic, at an unbeatable price.
Highlights
- 2x TOPTICA FemtoFibre Ultra (780 nm & 920 nm): ~1 W, <100 fs, 80 MHz, AOM + GDD; Wavelength multiplexed excitation
- Ultra-precise lifetime measurements, IRF ~20 ps: Time-channels down to 213 fs, 3 ps jitter. Parallel dual channel acquisition
- Detection max. 250 nm – 720 nm: NADH: 420 nm – 480 nm, FAD: 500 nm – 550 nm
Description
Healthy Cells or Tumor? Determine the Metabolic State by Fluorescence of NAD(P)H and FAD
The bh Multiphoton Metabolic FLIM System determines the state of the metabolism of live cells and tissues by precision recording of NAD(P)H and FAD decay functions. Different than in early NADH experiments, the state of the tissue is not characterised by the lifetimes of NAD(P)H or FAD but by the amplitudes of the components of their double-exponential decay profiles. Near-perfect separation of the two fluorescence signals by laser multiplexing adds to the reliability of the results. Multiphoton excitation by femtosecond fibre lasers reaches deep tissue layers and is friendly to live cells. In combination with advanced features of bh's SPCImage NG data analysis quantitative information of the metabolic state is obtained.
In addition to single metabolic-state images, the system is able to record z stacks of tissue samples, and time series of the metabolic parameters over seconds, hours or even days. Although the system is optimised for metabolic FLIM it is not restricted to this application. With its two excitation wavelengths it also records FLIM data from a wide variety of molecular probes, delivering high quality pH images, calcium images, chloride images, FRET images, and SHG images.
Basic Features:
- Fully motorized sample stage
- 4D Z-Stack FLIM Video rate recording ready – Express FLIM(*)
- Seamless analysis integration including Phasor Plot +, image segmentation by lifetime, FCS analysis
- Area and line scanning modes, as well as true point measurements for correlation measurements.
- Fast laser scanning unit for optimal image acquisition
- Basic detection filter kit, chosen for your experiment
(*) Depends on choice of time-tagging unit
Options:
- Choice of different single photon hybrid detectors
- Incubator with optional environment control for live cell work.
Specifications
Selected Specifications |
||
Principle |
Fast galvo-mirror laser-scanning excitation, non-descanned detection (NDD), and bh's multi-dimensional TCSPC FLIM technique |
|
Excitation |
fs pulsed laser, free-beam or fiber coupled |
|
Scan Rate, Pixel dwell Time |
Down to approx. 1 μs/pixel |
|
General Operation Modes |
TCSPC FLIM:
|
|
Scan Head |
||
Optical Principle |
Fast galvo-mirror laser-scanning excitation |
|
Laser Inputs |
Two independent inputs, fiber coupled or free-beam |
|
Optical Laser Power Control |
Continuous ND filter wheel control |
|
Laser Input Requirements |
Collimated free-beam, or fiber coupled with 12 mm diameter collimator. 1 to 2 mm beam diameter |
|
Connection to Microscope |
Adapter to left side port or port on top of microscope |
|
Scan Control |
||
Principle |
Hardware controlled precision laser-scanning with fast flyback for rapid acquisition |
|
Frame Size |
Frame scan 16 x 16 to 4096 x 4096 pixels, line scan 16 to 4096 pixels |
|
X Scan |
Continuous or pixel-by-pixel, |
|
Y Scan |
Line-by-line |
|
Electrical Laser Power Control |
Software control of a laser with analogue modulation input or control of a separate AOM. |
|
Laser Multiplexing |
Frame-, line-, pixel-, and intra-pixel. Requires software control of laser power. |
|
Beam Blanking |
During flyback and when scan is stopped. Requires software control of laser power. |
|
Frame Rate / Scan Speed |
Automatic selection of fastest rate or manual selection |
|
Scan Area Definition |
Interactive scan region selection, hardware zoom + offsets. |
|
Fast Preview Function |
Yes |
|
Beam Park Function |
Yes, interactive measurement point selection. |
|
TCSPC System |
||
TCSPC / FLIM Modules |
SPC-180NX |
SPC-QC-104 |
Number of Parallel TCSPC / FLIM Channels |
Typ. 2, max. 4 |
Typ. 2, max. 3 |
Electrical Time Resolution |
1.6 ps RMS / 3.5 ps FWHM |
16 ps RMS / <39 ps FWHM |
Timing Precision / |
1.1 ps |
11 ps |
Minimum Time Channel Width |
405 fs |
4 ps |
Saturated Count Rate |
12 MHz |
40 MHz, shared among active channels. |
Synchronisation with Laser Multiplexing |
Up to 4 laser wavelengths |
|
Recording of Multi-Wavelength Data |
Simultaneous in 16 channels, via routing function |
|
Experiment Trigger Function |
TTL, used for Z-Stack FLIM and microscope-controlled time-series |
|
Operation Modes of TCSPC System |
|
|
Software |
||
Data Acquisition Software |
bh SPCM, bh LabVIEW for integration of external devices |
|
Scanner Control Software |
Integrated in SPCM, bh LabVIEW for integration of external devices |
|
Operation System |
Windows 10 / 11 64 bit |
|
Data Analysis Software |
bh SPCImage NG |
|
Principle of Data Analysis |
MLE fit (GPU assisted processing) |
|
Model of Functions |
|
|
IRF Modelling |
Synthetic IRF function fit to decay data, auto-extraction of IRF from data, or measured IRF |
|
Excitation Sources |
||
Multiphoton FLIM |
Free-beam or fiber coupled femtosecond pulsed lasers, single wavelength or tuneable |
|
Optional |
Confocal FLIM, one additional BDS-SM ps diode laser can be coupled in the system. |
|
Detectors |
||
NDD Detectors |
Coupled directly to back port of microscope |
|
Optional |
Confocal detectors, coupled directly to scan head |
|
Standard Detector |
HPM-100-40 hybrid detector with GaAsP cathode, 250 to 720 nm, best for use with ns lifetime dyes |
|
Optional |
HPM-100-06 detector with <20 ps FWHM IRF width, 220 to 650 nm, best for ps lifetime autofluorescence studies |
|
Optional |
HPM-100-50 detector, 400 to 900 nm, best for long wavelength fluorescence |
|
Optional |
MW-FLIM GaAsP multiwavelength detector |
Downloads
Documents
Datasheets
The bh Metabolic Imaging Technique
Spectroscopic Background
NAD(P)H (nicotinamide adenine (pyridine) dinucleotide) and FAD (flavin adenine dinucleotide) are coenzymes involved in the cell metabolism. Both NAD(P)H and FAD are fluorescent. FAD and, especially, NAD(P)H are unique in the sense that their fluorescence intensities and fluorescence decay functions bear direct information on the metabolic state of the cells: The fluorescence lifetimes of NAD(P)H and FAD depend on the binding to proteins. Unbound NAD(P)H has a fluorescence lifetime of about 0.3 to 0.4 ns. Bound NAD(P)H has a lifetime of about 1.2 ns. For FAD the effect of binding is opposite: Bound FAD has a lifetime of a few 100 ps, unbound FAD of a few ns. Interestingly, the bound/unbound ratios of NAD(P)H and FAD change with the type of the metabolism. Cells that run preferentially oxidative phosphorylation (healthy cells) have more bound NAD(P)H and FAD, cells running preferentially Glycolysis (tumor cells) have more unbound NAD(P)H and FAD. Please see page Applications, Metabolic Imaging and 'The bh TCSPC Handbook', chapter Label-Free FLIM of Cells and Tissues.
Earlier Attempts to Determine the Metabolic State
For almost two decades it has been attempted to derive metabolic information from simple fluorescence lifetimes of cells or tissues. Please see The bh TCSPC Handbook for references. These attempts failed for two reasons. First, the fluorescence signal of NAD(P)H and FAD were not clearly separated. However, metabolism-induced lifetime changes for NAD(P)H and FAD go in opposite directions. The resulting changes in the net lifetime are therefore unpredictable, and cannot be used as an indicator of changes in the metabolic state. Second, the lifetimes of the decay components depend on cell parameters which are unrelated to the metabolic state. Therefore, the net fluorescence lifetime of cells and tissues is not a quantitative indicator of the metabolic state.
bh's Metabolic FLIM Technique
bh's metabolic FLIM technique differs from the earlier approaches by
- cleanly separating the fluorescence signals of NAD(P)H and FAD. Separation is obtained by combining excitation-wavelength multiplexing on the excitation side and spectral filtering on the detection side.
- using the amplitudes of the decay components of NAD(P)H and FAD decay curves instead of the lifetimes. The amplitudes of the decay components, a1 and a2, represent the fractions of bound and unbound NAD(P)H and FAD. They are not influenced by environment-dependent component lifetimes.
It turns out that the component amplitudes (or the ratios of the amplitudes) quantitatively represent the metabolic state. The results are largely independent of the cell type. Healthy cells have an a1 below 0.7, tumor cells an a1 above 0.7. Please see 'The bh TCSPC Handbook', chapter Label-Free FLIM of Cells and Tissues.
Making Metabolic FLIM Work
Extracting the amplitudes of the decay components requires accurate recording of the decay data in the pixels of the image, and reliable FLIM data analysis. Both problems have been solved by bh. The timing stability of the bh TCSPC FLIM modules is better than a few picoseconds, and the decay curves are resolved into a large number of time bins. (We recommend 1024 for metabolic FLIM) The HPM-100 hybrid detectors have a clean IRF without bumps and secondary pulses. The detectors are free of afterpulsing, resulting in an exceptionally low recording background. These features greatly improve the accuracy of FLIM data analysis. Data analysis is performed by SPCImage NG. The MLE fit of SPCImage yields highly accurate component lifetimes and amplitudes even at low photon numbers. The accuracy is further enhanced by intelligent binning, image segmentation functions, and the availability of a Global Fit. An example of an NADH a1 image is shown below.
Two-Photon Excitation
It should not be concealed that metabolic FLIM can also be performed also with the standard DCS-120 confocal FLIM System. The only requirement is that it has the right lasers installed. Please see (Appnote). However, there is a problem. NAD(P)H needs excitation at 375 nm or shorter. A wavelength this short does not go far into biological tissue. This restricts imaging to cells or single-cell layers. The bh Metabolic FLIM Imager therefore uses two-photon excitation. The excitation wavelengths is then 780 nm for NAD(P)H and 920 nm for FAD. These wavelengths penetrate as far as 100 micrometers into tissue. Fluorescence is detected through a non-descanned detection beam path so that photons are efficiently detected even if they get scattered on the way out of the tissue.